Nowadays, there are so many products of 12v water cooling pump in the market and you are wondering to choose a best one.You have searched for 12v water cooling pump in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 12v water cooling pump which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
906 reviews analysed
1. Yosoo SC-300T DC 12V Ultra-Quiet Water Cooling Pump Tank 4W Reservoir max.300L/h for PC CPU Liquid Cooling System
Feature
- Used in computer water cooling system
- LED power indicator to indicate power-on state
- Control circuit,the pump is more stable
- Support speed testing function
- Small 3P power connector can be directly plugged into the headboard fan original position
- With rubber shock absorber base,ultra-quiet experience.(Tips:It is good to use the pipe with 8MM inner diameter)
- Model:SC-300T
- Flow:max300L/h
- Head:max 1.9 meters
- Voltage:DC12V
- Power: 4W
- Water tank capacity: 150ml
- Noise:23DB
Description
Description:
– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm
Features:
– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.(Tips:It is good to use the pipe with 8MM inner diameter)
Package included:
– 1pcs ultra-quiet Water pump
2. Mavel Star 12 volt Small Mini Submersible Water Pump for Camping DIY Swamp Cooler PC Cpu Water Cooling Fountain Water Fall 63 GPH [Upgraded Version]
Feature
- 12v dc Submersible brushless Water pump,NOT Self-priming ,design to be submerged,can be powered by 12v Ac power adapter, please Search ASIN (B0713T89R1) for the power adapter.
- For the Water fall,Water feature & Water foutain in Home & Garden – Would make a nice fountain pump for a display,Can be powered by solar pannel( need to add a constant-voltage controller yourself) , or power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- For Your Bucket Swamp Cooler – This little Pump Would work like a dream for DIY Bucket Swamp Cooler ,power it by 12 Ac power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- For PC & laptop Cpu Water Cooling system – If you are looking into diy a quiet water cooling Set for your Cpu,you should never miss this pump to cool down your Cpu at average Temperature for best Performance
- For other Water circulation applications: used this to pump water for pets, evaporative cooler, to circulate R V. antifreeze, for hydroponic systems and many other applications
Description
Important Tips:
Please add a filter to avod hair or dirts being clogged with in this pumps.
if our pump does not working properly, please try to open and clean it before sending back to us,thank you very much!
Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140°F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
3. Mavel Star 12v dc Submersible Mini Water Pump PC CPU Water Cooling Pump 63 GPH
Feature
- 63 GPH 4.2W 0.35A, Perfect PC Cpu Cooling pump,running it on 5/16 id vinyl tubing will be good
- 12 volt dc Submersible Centrifugal Water pump, NOT Self-priming ,design to be submerged,can be powered by battery pack, solar pannle or 12 dc power adapter, please Search ASIN (B0713T89R1 ) for the power adapter.
- Nice water pump For the Water fall,Water feature or Water foutain in Home & Garden,can be powered directly by a power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- Perfect for the transfering of Water,acid or alkaline solution.
- Max working temperature: 60℃ /140F
Description
Specifications:
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
Note:
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Package includes:
1 * Water pump
4. Water Cooling Pump, 800L/H PC Water Cooling Integrated Mute Water Pump Support PWM for CPU Cooling System.
Description
Specification:
Material: Acrylic + ABS
Model: PU-FS4-J
Rated current: 0.7A
Rated function: 8W
Pump head: 4 meters
Pump flow: 800L/H
Starting voltage: 7V
The highest voltage: 13.5V
No-load speed: 5000RPM
Load speed: 3000RPM
Size: Approx. 5.5 * 6.4 * 6.4 cm/ 2.2 * 2.5 * 2.5 in
Weight: about 285 g
Package list:
1 * Water Pump
1 * Rubber Mat
5. bayite BYT-7A015 DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
Feature
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 3/8”(10mm). Plug type: 2.1mm x 5.5mm female
- Power source: DC 12V(POWER ADAPTER INCLUDED). Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement or full refund without return
Description
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Circulation pump is non-self-priming pump (0 Suction Height).
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI). This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure.
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Please note: If you use this pump for circulating wort it should be cleaned out after using it.
Item included:
1x DC 12V Solar Hot Water Circulation Pump
1x AC 110V- 240V to DC 12V 2A Power Supply Adapter
6. bayite BYT-7A014A DC 12V Solar Hot Water Heater Circulation Pump with DC Power Supply Adapter Low Noise 3M Head 8LPM 2.1GPM
Feature
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(Comes with a AC 110v to DC 12v power adapter), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
Description
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Item included:
1x bayite DC 12V Circulation Water Pump
1x AC 110v to DC 12v power adapter
7. Diyeeni 19W 12v CPU Water Cooling Pumpe Reservoir DIY Combo, 800L/H Water Pump, G 1/4" Thread Port, PC CPU Water Cooling System Heat Exchanger Tool, Transparent Acrylic Material, Easy Install(300mm)
Feature
- The water tank is integrated with the water pump for easy installation and a more beautiful appearance
- The water cooling tank features thick pipe wall, which can sustain the tremendous pressure
- The pump is waterproof and durable, ensuring a long service life
- Inlet and outlet interface: G1/4 thread
- Heat-resistant acrylic tank: featuring reliable, light weighted POM and PMMA construction, crystal clear and highly durable. In order to facilitate transportation, the pump and the water tank are disassembled and placed, and the user needs to install it simply.
Description
Specifications:
Material: PMMA + POM + Anode Aluminum
Color: Black + Transparency
Tank length: 110mm, 160mm, 210mm, 300mm (Optional)
Hole site: G1/4 Thread
Rated current: 0.8A
Rated power: 19W
Water pump flow: 800L/H
Starting voltage: 12V
Maximum voltage: 13.5V
Power interface: big 4pin, small 4pin
Overall Length: Approx. 19.5cm / 7.7in
or 24.5cm / 9.6in
or 29.5cm / 11.6in
or 38.5cm / 15.1in
Diameter: 5cm / 2.0in (top), 4cm / 1.6in(bottom)
Weight: Approx. 557-640g
Package List:
1 * Water Tank and Pump
2 * Plastic Buckle
2 * Metal Buckle
1 * Bag of Screw and Nut
8. bayite BYT-7A006 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
Feature
- Circulation pump is non-self-priming pump (0 Suction Height). Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft. Max system pressure: 10Bar(145PSI) . This doesn’t mean the pump produces 145PSI. It means the pump can be connected to the system less than 145PSI pressure
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours. Please note: If you use this pump for circulating wort it should be cleaned out after using it
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
9. bayite BYT-7A014 DC 12V Solar Hot Water Heater Circulation Pump Low Noise 3M Discharge Head 2.1GPM
Feature
- Circulation pump is non-self-priming pump. Max Flow Rate: 2.1GPM, Max Discharge Head: 9.8ft
- 1/2″ Male thread on the pump. The OD of the brass coupler is 10mm. Plug type: 2.1mm x 5.5mm female. NO POWER ADAPTER INCLUDED
- Power source: DC 12V(NOT INCLUDED), Rated current: 0.7A, Brushless Motor, Low noise: 30db at 1 metre, Service life: 30000 hours
- Max circulating water temperature: 100°C/212°F. It’s submersible but can’t be immersed in hot water exceeding 50°C/122℉
- One year warranty: replacement without return
Description
It’s perfect for the home solar water heating systems or other circulation pump application.
Brushless Motor,Super long working life,low consumption and low noise
Power source: DC 12V
Rated current: 0.7A
Low noise: 30db at 1 metre
Service life: 30000 hours up
Inlet/Outlet: 1/2″ male thead. Fit both 1/2″ NPT and BSP female thead. We’ve tested. w/ two brass coupler
Max Flow Rate: 8L/Min(2.1GPM)
Max Water Head: 3 metre(9.8ft)
Max system pressure: 10Bar(145PSI)
Max circulating water temperature: 100°C/212°F. Can’t be immersed in hot water exceeding 50°C/122℉
Package included:
1x bayite DC 12V Circulation Water Pump(NO POWER ADAPTER INCLUDED)
10. DC12V 130PSI Self-priming Demand Diaphragm Water Pump 1.5 GPM DC 2.1mmx5.5mm Jack with On/off Switch & Cooling Fan for RV Camper Boat Marine High Pressure Car Washing Cleaning Sprayer Sprinkler System
Feature
- Built-in pressure demand switch shuts pump off at maximum pressure
- Built-in port filter & DC 2.1mm x 5.5mm port (upgraded version, you just need to connect the pump with AC to DC Power Adapter, which is sold separately)
- Flexible diaphragm design allows pump to run dry without damage
- Compact & Portable – Can take anywhere and mount in any position
- Pressure: 80psi(MAX 130psi), Flow: 1.5 GPM, Maximum Suction Lift: 5 feet, Maximum Head: 180 feet
Description
theBlueStone Diaphragm Pump uses a variety of imported materials to have thermal protection, smooth operation, long-time continuous idling, long-time continuous load operation. It’s totally sealed, and you could feel the high stable pressure. It’s a good self-priming pump, which has good suction lift characteristic.
TBS1YB-12-80KCF 1.5 GPM 80PSI DC 12V Demand Diaphragm Water Pump with On/off Switch & Cooling Fan
Built-in pressure demand switch shuts pump off at maximum pressure
Flexible diaphragm design allows pump to run dry without damage
Compact – mount in any position
Features:
1.Diaphragm pump combines the advantages of self-priming pump and chemical pump. Installed in a dry, well-ventilated location; pumps can not work in water.
2.Using a variety of imported materials, self-priming, thermal protection, smooth operation, long-time continuous idling, long-time continuous load operation.
3.Totally sealed, high stable pressure.
4.Rubber bracket can absorb vibration from the pump when working.
5.When the water pressure is too high, pump will protect themselves and normal work, water pipes will not burst, it is safe and durable.
Application:
Agricultural field sprayers
Row crop sprayers
Irrigation for fields, farmland, vineyards, nurseries, greenhouses
Sprinkler systems
Potable water, fresh water, and salt water transfer and dewatering
High pressure / focused target spot spraying
Pressure Washing
RV/Boat/Marine/Caravan pressurized water system
Specification:
Volts: 12V DC
Power: 80W
Maximum Flow: 1.5 gpm
Working Pressure: 80psi
Maximum Discharge Pressure: 130psi
Ports Inlet/Outlet: 3/8″ Barbed Thread
Maximum Suction Lift: 5 feet
Maximum Head: 180 feet
Conclusion
By our suggestions above, we hope that you can found 12V Water Cooling Pump for you.Please don’t forget to share your experience by comment in this post. Thank you!