858 reviews analysed
1. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
2. 6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter
Feature
- Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement
- Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting
- For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar)
- Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools
- Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow
- The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance
- Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for durability and safety
Description
Features:
Angled ball valves:
45 Degree angle manual shut-off valves with 1/4 inch SAE male and female fitting, quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
3 Pieces color coded shut valves can be operated with one hand, screws onto charging hose end.
Vacuum pump adapters:
Adapters for: 1/4 female flare x 1/2 male Acme.
These adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
Quick and easy connection and disconnection with high flow. Corrosion resistance, ductility at high temperatures, and low magnetic permeability, build to last in your tool box for decades.
Specifications:
Angled compact ball valves:
Size: 4.9 x 3.7 x 0.9 inches
Weight: 10.7 ounces
Material: copper
Color: as shown in the picture
Compatible with: R410A, R134A, R12, R22, R502, AC, HVAC refrigeration charging hoses
R12 R22 to R134a adapters:
Material: copper
Size: 2.6 x 1.6 x 4.4 inches
Suitable for: R12, R22 systems and R134a systems
Package includes:
3 x Angled compact ball valves
3 x Vacuum pump adapters
Note:
The brand names we mentioned just for adaptability of products, are not for trade mark using, kindly noted.
3. XtremepowerUS 3CFM or 4CFM Air Vacuum Pump HVAC A/C Refrigeration Kit AC Manifold Gauge Set (3CFM 1/4HP Air Vacuum Pump)
Feature
- SIMPLE BUT POWERFUL: XtremepowerUS 1/4 HP 3 CFM 1-Stage Rotary Air Vacuum Pump is designed to have high efficiency and low noise output with internal high volume cooling fan for extended use.
- HEAVY DUTY CASING: Die-cast Aluminum Alloy Casing enables the vacuum pump be light and durable at the same time. Equipped with brass fitting tethered safety caps to prevent oil leaks during transportation and handling.
- EASY OIL CHANGE: The vacuum pump features a simple Oil Fill Port for a clean pour and Oil Drain Plug positioned beneath the oil reservoir to quickly drain when needed. Checking the spillage meter will help to ensure the proper level of oil.
- INCLUDED: Multicolored set of three 36” hoses, Manifold Gauge, Oil Bottle, Accessories and Storage Bag to keep equipment clean and dust free.
- The XtremepowerUS HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R134, R134A, R12, R22, R22A, R404A, R407C or R502
- also commonly used for wine degassing and automatic milking.
4. Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock (1/4 inch tee)
Feature
- Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.7 ounces/Size:1/4 inch od
- Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:| 120psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel (SUS)/Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
5. Robinair (15310) VacuMaster Single Stage Vacuum Pump – Single-Stage, 3 CFM
Feature
- Robinair’s VacuMaster Single-Stage Vacuum Pump is designed for air conditioning and refrigeration service
- featuring a single stage rotary vane design, 8.5 ounce oil capacity, and non-skid feet
- 3 CFM free air displacement
- factory rated to 75 microns
- 1/4 HP, 110V/60Hz thermally protected motor
- Features an inlet fitting engineered for maximum airflow, while preventing oil backflow, and finned aluminum surfaces that dissipate heat faster, keeping the pump cooler and extending life
- 1/4 inch flare and 1/2 inch ACME inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir
6. X AUTOHAUX 4mm Hose Barb Brass 3 Way Tee Connector Adaptor for Air Water Gas Oil Pipe 5pcs
Feature
- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Relative softness of brass threading when compared to other metals allows for a tight seal
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule
- Hose fittings can connect, control, change the direction and terminate the flow in piping and hose systems
- Note:Please confirm the shape and size before payment
Description
Description:
Condition: Brand New
Material: Brass
Color: Gold Tone
Shape: 3 Way Tee
Internal Diameter:2.5mm / 0.10″
External Diameter:4mm / 0.16″
Provide high resistance to abrasion and corrosion.
Pressure: will withstand burst pressures of plastic tubing
This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems.
Typical Application:Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines
Please confirm the shape and size before payment!
Package included:
5 x Brass Barb Hose Fitting Connector
7. Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
Description
New R410A Ductless Mini Split Systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system (i.e. R22). This new port size is 5/16″ SAE and some gauge sets carry 1/4″ SAE connectors. Port adapter converts the 5/16″ SAE ports to use with 1/4″ SAE gauge sets.
8. R-1234yf Hose To Vacuum Pump Adapter (R1234YF)
Description
Features and Benefits: Includes adapters to connect a R-12 or R-134a to a R-1234yfrefrigerant tank Adapters: 1 / 2″ ACME w / LH threads female X 1 / 4″ SAE female X 1 / 2″ ACME male. Use to connect a R1234YF refrigerant tank to R12 or R134a hoses
9. Tailonz Pneumatic Air Line 1/4 inch od Pneumatic Nylon Tube 32.8ft Air Brake Tubing Nylon Hose
10. Swpeet 12Pcs 6 Style 6mm Push to Connect Tube Fitting Assortment Kit, Including PL-1/4-N1, PL-1/4-N2, PC-1/4-N1, 1/4 inch od, 1/4 inch Od Y Spliter, PUC-1/4 Push to Connect Tube Fitting
Feature
- ☎ HIGH QUALITY —- These fittings are selected very high quality and the best part is they already have teflon tape so all you need to do is pull them out of the bag and thread them in.
- ☎ BODY STYLE —- In this kit, You will get 6 different styles tube fittings, These tube fittings body style including Male Elbow, Union Straight, Male Straight. Different Styles can meet different needs.
- ☎ TUBE FITTING SIZES —- PL-1/4-N1: Male Elbow – 1/4″ Tube OD x 1/8″ NPT Thread
- PC-1/4-N2: Male Straight – 1/4″ Tube OD x 1/4″ NPT Thread
- PL-1/4-N2: Male Elbow – 1/4″ Tube OD x 1/4″ NPT Thread
- 1/4 inch tee
- 1/4 inch y spliter.
- ☎ FLUID TYPE —- Air Only. Admitted, Air Vacuum Water liquid fit push to connect fitting kits quick connect fitting water (no freezing), Elliptical sleeve configuration is ideal for easy to push and release the tubing.
- ☎ WHAT YOU GET —- We have prepared 12 Pieces 6 different styles of tube fitting for you to meet your different needs, including 2Pcs PL-1/4-N1, 2Pcs PL-1/4-N2, 2Pcs PC-1/4-N1, 2Pcs 1/4 inch od , 2Pcs 1/4 inch od y spliter, 2Pcs PUC-1/4. Applicable Tube: Polyurethane and Nylon.
Description
✿ Swpeet 12Pcs 6 Sizes 6mm Push to Connect Tube Fitting Assortment Kit
★ WHY CHOOSE US?
✔ 1, Good quality fittings and worked well for the application. Effectively prevent the jam from happening! Widely used for connecting bowden extruder.
✔ 2, Easy to use push to connect for air tubing. Nice that the threads already have sealing compound, no teflon tape needed.
✔ 3, Easy to disconnect tube by one push on the black cap.
★ Specification:
☞ Thread: 6mm
☞ Net Weight: 6g/pcs
☞ Material: Stainless Steel and Plastic
☞ Color: Black and Silver
★ User’s Guide:
1. Except air and water,don’t attempt to use the fittings on other fluids.
2. The tube fitting is prohibited where spark and fire might be occurred.
3. The tube fitting is prohibited if water temperature is above 60’C.
4. Never apply tube joint with additional external load(bending,twist or pulling),otherwise damage or leakage will be occurred.
★ Package Include:
▲ PL-6mm-N1 Connect Tube Fitting ———– 2Pcs
▲ PL–6mm-N2 Connect Tube Fitting ———– 2Pcs
▲ PC–6mmN1 Connect Tube Fitting ———– 2Pcs
▲ 6mm od Connect Tube Fitting ———– 2Pcs
▲ 6mm od y spliter Connect Tube Fitting ———– 2Pcs
▲ PUC-6mm Connect Tube Fitting ———– 2Pcs
Conclusion
By our suggestions above, we hope that you can found Air Vacuum Fittings for you.Please don’t forget to share your experience by comment in this post. Thank you!
