Top 10 Assorted Brass Vacuum Connectors

Description:
Condition: Brand New
Material: Brass
Color: Gold Tone
Shape: 3 Way Tee
Internal Diameter:2.5mm / 0.10″
External Diameter:4mm / 0.16″
Provide high resistance to abrasion and corrosion.
Pressure: will withstand burst pressures of plastic tubing
This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way.
Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems.
Typical Application:Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines
Please confirm the shape and size before payment!

Package included:
5 x Brass Barb Hose Fitting Connector

User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.

Ring terminals 100% Pure Copper Heavy Duty Cable Lugs

With Heat Shrink By CAS Precision.

* Made from 100% Copper Battery Lugs for Maximum Conductivity 

* Contains Five Heavy Duty Lugs and Five Pieces Heat Shrink

* Heat Shrink Provides Perfect Seal To Foreign Substance And Liquids

* Great for Trolling Motors, Boat wiring, Golf Carts, Distribution Box, Solar Panels, Home applications, etc.

* Wire Can Be Crimped Or Soldered To Copper Lug

* Closed End Design Keeps Out Moisture, Protecting Wire Connections from Corrosion

50 PCS Solder Seal Butt Wire Connectors and 50 PCS Heat Shrink Tubing Kit

Solder Seal Wire Connectors and Heat Shrink Tubing, an innovative wiring solution that allows to create soldered waterproof wire connections safely and efficiently. This kit comes with 4 sizes of color coded wire connectors and also include 50 pcs 20mm long single wall heat shrinkable tubes

Package includes:

Solder Seal Wire Connectors:

10 x White Electrical Connectors: Diameter 1.7 mm, able cross-section 0.25-0.34 mm²(A.W.G.:26-24);

23 x Red Electrical Connectors: Diameter 2.7 mm, Cable cross-section 0.5-1.0 mm²(A.W.G.:22-18);

12 x Blue Electrical Connectors: Diameter 4.5 mm, Cable cross-section 1.5-2.5 mm²(A.W.G.:16-14);

5 x Yellow Electrical Connectors: Diameter 6.0 mm, Cable cross-section 4.0-6.0 mm²(A.W.G.:12-10).

Heat Shrink Tubing:

50pcs x 3.2*20mm approx. Black

 SOLDER SEAL WIRE CONNECTOR –SOLDER AND SEAL IN ONE QUICK CONVENIENT STEP

1.Waterproof Wire Connectors would prevent wires from corrosion.

2.Solder and Hot Melt Adhesive inside can be perfectly Waterproof.

3.Transparent Sleeve of the butt connectors provide Visual Inspection.

4.Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside

5.You can control the operating temperature and heating time.

Compliant with ROHS, ISO 9001:2008, SGS and CE standards.

Operating temperature range:

Shrinkage ratio is 2:1

Minimum temperature for solder to melt: 138°C  (280 ℉)

Minimum shrink temperature: 80°C  (176 ℉)

Operating temperature :-55℃ – 125℃

Note: The Minimum and Maximum Temp. are the temp. for connector surface.

SOLDER SEAL WIRE CONNECTOR –SOLDER AND SEAL IN ONE QUICK CONVENIENT STEP

1.Waterproof Wire Connectors would prevent wires from corrosion. 

2.Solder and Hot Melt Adhesive inside can be perfectly Waterproof. 

3.Transparent Sleeve of the butt connectors provide Visual Inspection. 

4.Dual-walled design tubing: polyolefin tubing on the outside and hot melt adhesive inside 

5.You can control the operating temperature and heating time. 

Compliant with ROHS, ISO 9001:2008, SGS and CE standards. 

Operating temperature range: 

Shrinkage ratio is 2:1

Minimum temperature for solder to melt: 138°C  (280 ℉)

Minimum shrink temperature: 80°C  (176 ℉) 

Operating temperature :-55℃ – 125℃ 

Note: The Minimum and Maximum Temp. are the temp. for connector surface.

Tips.

 1.Keep rotating during heating with a heat gun.

2.Be careful not to heat over from the beginning, it can cause tube melting damage while the solder ring is still not melting.

 3.Do not a too close heating gun on the solder connector, keep about 5cm from heat targeted connectors surface

PN15 series are ready to use as all thread are Teflon Coated. Please use straight cut tubing before inserting into the fitting.

Ruikarhop Brass Compression Sleeves Ferrules With Good quality,
Durable and high standard brass compression Sleeves,
Please feel free to contatct us if you have any questions about our product.