The Best Bowden Heating Block

Feature

• Made of solid Aluminum material, durable in use
• Works perfect with nozzle and nozzle throat
• Heating fast, heating evenly, smooth silk
• After installation, the tightness of the screw is high and the leakage problem is effectively prevented
• Suitable for Filament : both 1.75mm and 3.0mm M6 Nozzle

Feature

• 100% original and high quality 3D Printer accessories for Creality Ender 3
• Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle
• MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W
• Tip of the nozzle, aluminum heating block, throat pipe
• Suitable For Creality ender 3

Feature

• This is a “drop in” complete kit for the Creality Ender 3 or Ender 3 Pro with an authentic Creality all metal hotend, 24V heating element, thermistor, hotend sock, and 4 brass nozzles (1 x 0.2mm, 2 x 0.4mm, 1 x 0.6mm) for long lasting quality. All parts manufactured specifically for use in Creality machines and similar open source model printers. Quality hotend sock provides a much more stable temperatures for the most consistent printing results with filaments such as PETG, ABS, and even Nylon!
• Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!
• The Titanium heat break and Aluminum heat block and heat sink allow for SAFE printing at all temperatures as opposed to the stock Creality hotends where the PTFE meets the very hot nozzle in the heat block. Perfect for materials such as Nylon, Carbon Fiber, and other exotic materials because the PTFE is a safe distance away from the hotend which prevents dangerous off-gassing.
• The perfect replacement kit if the your stock hotend has failed or constantly jams. An intelligent and engineered design ensures the best operational use to provide noticable improvements over the cheap stock option for the Ender 3. Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated. Zip ties are also included for tidy cable management.
• Not just for the Ender 3. This hotend kit will fit on the Ender 3 Pro, Ender 5, CR-10, CR-10S, CR-10S 4/5, CR-10 Mini, GeeTech A-10, Tevo Tornado, Anet Printers, Tronxxy-XY. PLEASE NOTE: Some printers may need minor modifications or extra assembly such as splicing wires for the heating element for complete functionality from this whole kit. PTFE tubing is cut to 50cm.

Feature

• Creality Offical Aluminum Heater Block with High Quality Which is Suitable for Extruder Hotend Kit of Ender 3 /Ender 3 Pro / CR10 /CR10S /S4 /S5
• Creality Original Silicone Covers are great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with most 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation
• These Creality 3D hotend socks will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures
• With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
• 3 sets =3X Aluminum Heater Block +3X Stainless Steel Extruder Nozzle Throat+3X Silicone Covers

Feature

• ✔️New V6 Sensor Heater Block – For HT-NTC100K PT100 sensor cartridge
• ✔️Material: Aluminum alloy
• ✔️For V6 nozzle (M6 Screw)
• ✔️With Allen wrench, Easy to install
• ✔️Made by WINSINN

Feature

• This extruder set is compatible with Creality Ender 3, Ender 3 Pro and other 3D printers.
• Mainly including 2 fans, fan cover, heat block, cooling block, nozzle, throat pipe, connector, cable, tube, etc.
• Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F.
• Nozzle and tube connect seamless, prevent material leaking and blocking. Heating tube, 24V 40W.
• Durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.

Feature

Feature

Feature

• A must upgrade or replacement Hot End Kit for your Ender 3 Printer: fit for Creality Ender 3, Ender 3 Pro, not for CR10, if you want, please search ASIN”B082XYW1PV” in our Fuyuansheng Shop.
• MK8 Extruder Hot End Kit: include Bowden Teflon tubing+Thermistor NTC B3950 100K + Heating tube 24V 50W+MK9 Heater Block with Silicone+0.4mm Nozzle.
• Extremely slippery tubing -Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
• Comes with assemble parts, you need to Assemble them by yourself, it is very easy.
• After-sales Guarantee: If missed any parts, please feel free to contact first, from your Order ID, we will resend you a new replacement or refund you.