
678 reviews analysed
1. Cen-Tec Systems 92938 Central Vacuum CT20DXQD Kit with 35′ DC Hose
Feature
- Compatible with all major brands of central vacuums with these inlets including beam, Electrolux, eureka, nutone, vacumaid, vacuflo, husky, canavac, cyclovac, md and imperium
- Package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the power nozzle from the hose handle
- The 35 foot hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle
- The quiet drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
- 14 inches wider power nozzle
Description
The 92938 central vacuum accessory package is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life-time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishings. We have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The direct connect end makes the system compatible with all major brands of industry standard high volt and low volt electrified inlet valves. By connecting to all major brands of electrified inlets the 92938 is compatible with all major brands of central vacuums with these inlets including beam, ELECTROLUX, eureka, Nutone, VacuMaid, Vacuflo, husky, Canavac, Cyclovac, Md and imperium brands. A 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle ideal for cleaning hard floor surfaces. The three position switch also allows you to also control power to electric nozzle and the vacuum when cleaning carpeted surfaces. A soft anti-microbial treated cotton-lycra blend hose Sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose. The hose has a direct connect end combining the high voltage pin jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance.
2. Cen-Tec Systems 99702 Central Vacuum 35 Foot Universal Connect Electric Hose with Hose Sock and Button Lock Stub Tube
Feature
- Universal hose end insures compatibility
- 35 Feet of hose length, helping you be able to reach in every hard-to-get-to corner of the room
- Compatible with major brands of central vac, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed 35 foot knit hose sock, which protects furnishings from scratches from the hose
Description
The #99702 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also included is an installed knit hose sock, which saves your furniture and furnishings from the wear and tear of the hose.
3. Cen-Tec Systems 90177 Central Vacuum Direct Connect Electric Hose with Hose Sock and Applied Anti-Microbial Spray, 35′
Feature
- 100% Cotton
- Made in the USA or Imported
- Direct Connect Hose End with a 2 Pin-Prong to attach directly to the inlet valve
- Compatible with major brands of central vacuum, including Beam, Nutone, Electrolux, Hayden, VacuMaid, Aggressor, Vacuflo, MD, Canavac, Cyclovac, Air Vac. Comes applied with SmartShield antimicrobial spray
- The Antimicrobial Spray bonds with the surface of the attachment, creating a microscopic layer of organic bristle shafts proving inhospitable to mold, mildew and bacteria
- The antimicrobial spray is EPA registered and is odorless, colorless and will not wash off under normal use
- It protects the tool for a year or more
- This hose is not compatible with Vacuflo 4940 two pint and micro-switch inlet valves. Nor is it compatible with Hayden electric accessories sold before 2013, unless the electric wand set is replaced
Description
The #90177 electric hose is an individually packed 35 Ft. electric hose with direct connect wall end and chrome locking stub tube. The hose features a soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. Also includes an installed knit hose sock to protect furnishings. It is compatible with major brands of central vac, including beam, Nutone, Electrolux, Hayden, VacuMaid, aggressor, Vacuflo, md, Canavac, Cyclovac, and Air Vac. The gentle cleaning traits of the dust brush will fit on wands for tough to reach places, and are a must for any accessory kit. It comes applied with an antimicrobial spray, which bonds with the 90177’s installed hose sock, creating a microscopic layer of organic bristle shafts proving inhospitable to mold, mildew and bacteria. The antimicrobial spray is EPA registered and is odorless, colorless and will not wash off under normal use. It protects the tool for a year or more and can be renewed as simply as reapplying the spray application. The hose also is a full 35 feet in length, and includes a soft grip handle with a great ergonomic feel.
4. Ovo Universal Central Vacuum Hose High Voltage Switch Control – Crushproof Tube – Fits All Inlets, 40 FT, Black and grey
5. Cen-Tec Systems 90298 Central Vacuum Direct Connect Electric Hose, 30′
Feature
- Includes a soft-grip handle with a great ergonomic feel
- Includes an installed 30 foot knit hose sock
- which protects furnishings from scratches from the hose
- The hose has a direct connect end, combining the high voltage pin jack in conjunction with the low voltage contacts, permitting control of both the vacuum unit and the electric power nozzle
- Compatible with all major brands of central vacuums with these inlets including Beam, Electrolux, Eureka, Nutone, VacuMaid, Vacuflo, Husky, Canavac, Cyclovac, MD and Imperium
- Current version of upper wand maybe required for your Powerhead.
Description
The 90298 is an individually packed 30 Ft. (9M) electric hose with direct connect wall end and chrome locking stub tube. The hose is often known as a XZ9231 and features soft grip handle with flush cord management system. Our family of 4-wire hoses is high quality, resulting in no kinks and great suction to go along with the excellent flexibility. This central vacuum hose connects to the wall via a “direct connect” connection. There is a high quality 30 foot knit hose sock installed on the vacuum hose. The hose is compatible with all major brands of central vacuum including Eureka, Beam, Electrolux, Vacumaid, Canavac, Hoover, Cyclovac, Husky, Vacuflo inlets with pin jack inlets, M+S, MD, Imperium, and most regional brands. The 30 foot hose has a direct connect end, combining the high voltage pin Jack in conjunction with the low voltage contacts permitting control of both the vacuum unit and the electric power nozzle.
6. Cen-Tec Systems 92960 Central Vacuum Kit with Ct20Qd and 35′ Dc Hose
Feature
- Compatible with major brands of central vacuums installed with industry standard direct connect wall inlets
- Central vacuum replacement package of the three most replaced components including a premium power nozzle, fully integrated electric telescopic wand, and 35 foot total control electric hose
- The 14″ wide CT20QD power nozzle has a chevron agitator design shown to provide superior cleaning performance
- 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle
- A soft anti-microbial treated cotton-lycra blend hose sock is installed on the hose to protect for surfaces, furnishings, and walls from the corrugation of the hose
Description
The 92960 central vacuum accessory set is designed to provide superior cleaning for today’s home with a mix of both carpeted and hard floor surfaces. The CT20QD power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery which hales extend the life of your carpet, excellent surface grooming maintaining carpet appearance, and superior brushed edge cleaning. The lift time poly-v drive belt will provide years of reliable service and reduces noise and vibration. The 30 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers have communicated a preference for a hose sock to protect the investment in their home so the 92960 has a premium anti-microbial hose sock preinstalled. The direct connect hose end makes the 92960 compatible with all major brands of central vacuums installed with industry standard direct connect wall inlets including Beam, Electrolux, Eureka, Nutone, vacumaid, Cyclovac, vacuflo, Canavac, Husky, Star Power, MD, and Imperium. The 14″ wide CT20QD power nozzle has a chevron agitator design shown to provide superior cleaning performance. The Quiet Drive poly-v drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The Quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.
7. Cen-Tec Systems 93070 Central Vacuum Kit with Switch Control Hose 35′
Feature
- Compatible with all major brands of central vacuum systems equipped with industry standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, hayden, md, canavac, cyclovac
- The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves
- The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle
- The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
- To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening
Description
The 93070 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93070 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
8. 35′ "Comet" Central Vacuum Kit with Hose, Power Head & Tools – Works with All Brands of Central Vacuum Units
Feature
- Light gray 35ft 1 3/8″ inside diameter electric crushproof hose (27% more airflow than 1 1/4″ inside diameter hose) with a 3-way switch and a soft grip ergonomic handle.
- Light gray colored “Comet” power head.
- Comes complete with a 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tool and duster), telescopic wand for use with floor brush, red dust mop, caddy bag, wand tool caddy attachment, hose hanger and wall holder
- Compatible with any standard 1.5 inch inside diameter wall inlet valves. Please measure your inlet valve to ensure compatibility. Your choice of either a pigtail or direct connect hose configuration. Please notify us of your choice after purchase.
- Not compatible with the Vacuflo proprietary inlet valve (HP Vacuflo Series 4940, 4949, 4940, 4941) . If you are unsure of compatibility, please message Alder Products Ltd.
Description
Electric Hose – Compatible with any 1.5″ wall inlet valve – 1 3/8″ inside diameter crush-proof lightweight hose with button lock handle with a 3-way control switch – 360 degree swivel handle – New handle design with a soft grip – Strain relief helps maintain consistent suction by preventing kinks in the hose at the handleElectric Power Head – Durable drive/geared belt – Electronic reset button to protect motor; motor will instantly stop if the brush roller is jammed – Headlight for improved viewing angle – Sealed ball bearings for no hair build-up Brush roller viewing window – On/Off foot pedal switch button – Non-marking wheels – Great edge cleaning – Protective bumper to protect baseboards and furniture – 13 inch cleaning path Tools/Accessories – Mesh attachment caddy bag – Steel ratchet wand – Set of cord management button lock wands with cord clips – 4 piece tool kit (12″ Floor brush, crevice tool, upholstery tools and duster) – Wand tool caddy attachment – Hose hanger – Wand holder – Red dust mop
9. Cen-Tec Systems 94093 35 Ft. Low Voltage Central Vacuum Installed Hose Sock, Light Gray
Feature
- 1.375” x 35 foot pearl gray central vacuum hose designed to fit industry typical wall inlet valves and provide for on off control of your central vacuum from the hose handle
- Has a 360 degree swivel handle with a comfortable grip providing single handle control of the hose and vacuum tools in a comfortable compact design
- The hose carcass is lightweight and crush proof to making it easier to vacuum and reducing fatigue
- Compatible with all major brands of central vacuum including eureka, beam, electrolux, vacumaid, canavac, hoover, cyclovac, husky, vacuflo inlets with pin jack inlets, m + s, md, imperium, and most regional brands
- The eva body and pearl gray color will not mark walls, floors, or furnishings and the 35 foot length is longer than the industry standard 30 feet to make it easy to reach to the corners of the room even when furnishing are present
- The wall end design fits industry standard wall inlets equipped with low voltage contacts inside the valve opening. The split contacts in the wall end provide a simple circuit through to the handle switch for turning your central vacuum power unit on and off at the working end of the hose
- Low voltage hose, so it is not compatible with electric power nozzles
- The locking stub tube is ideal for insuring the wand stays in place, avoiding unintended separation
- Features an installed soft cotton lycra blend hose sock which smooths the surface of the hose to prevent damage to base boards, door jambs, and fine furnishings in the home. The sock is treated with an anti-microbial to protect your home environment
- Hose is made in the USA
10. Cen-Tec Systems 93015 Central Vacuum Electric Kit with CT25, CT10, and 35 Foot Direct Connect Hose
Feature
- Direct connect hose end is compatible major brands of central vacuums which are installed with direct connect dual voltage wall inlets
- 35 foot crush proof total control hose lets you control both the central vacuum power unit and the power nozzle independently or together
- The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today’s new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow
- The Ct10 is an industry exclusive power nozzle designed for cleaning hard floor surfaces, spot rugs, and premium area rugs moving from hard floor surface to carpeted surface without stopping
- The CT10’s agitator will not harm sensitive hard floor surfaces nor damage premium area rugs and imparts a positively self-propelled feel. At 1.50 pounds the CT10 is lightweight and easy to control
Description
The 93015 central vacuum accessory set is unique to the industry in that it provides two electric power nozzles. One designed for all carpeted surfaces and a second that has been designed specifically for hard floor, spot rugs, and premium area rugs. Many homes now have a mix of flooring including hardwood, stone, tile, laminate, spot rugs, area rugs, and wall to wall carpeting. The 93015 is designed to expertly clean all of these surfaces. Both electric nozzles apply the latest technology and have the premium features expected in premium electric power nozzles. As suggested by customers two integrated electric wands are provide one for each power nozzle to add convenience and speed up the task that is cleaning. The 35 foot total control hose is the longest permitted by UL/CSA standards so you are sure to reach every part of your home. Customers have shown a strong preference for the hose to be socked to protect their fine furnishings, base boards, and floor surfaces so the 93015 has a premium anti-microbial sock pre-installed. The direct connect hose end is compatible with all major brands of central vacuums including, Beam, Electrolux, Eureka, MD, Vacuflo, Vacuumed, Imperium, Star Power, Cyclovac, Canavac, Husky, and Hayden installed with direct connect dual voltage wall inlets. The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today’s new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow under the chevron brush agitator for superior embedded dirt pick-up regardless of carpet type. The double swivel neck design makes the CT25QD the easiest nozzle in the market to control. The lifetime poly-v belt drive reduces noise and vibration. The belt is inset from the edge of the brush to insure brushed edge cleaning to both sides of the nozzle. A soft bumper protects base boards and furnishing. A quick release wand feature facilitates above the floor cleaning needs.
Conclusion
By our suggestions above, we hope that you can found Central Vacuum Hose Electric 35 for you.Please don’t forget to share your experience by comment in this post. Thank you!