Nowadays, there are so many products of dc 90mm cooling fan 24v high speed pressure in the market and you are wondering to choose a best one.You have searched for dc 90mm cooling fan 24v high speed pressure in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings dc 90mm cooling fan 24v high speed pressure which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
599 reviews analysed
1. UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm (4.72×4.72×1.26 inch)
Description
BASICAL INFORMATION
- Dimension: 120x120x32mm
- Screw Hole Spacing: 104.5 mm±0.5
- Weight: 202g
- Connector: XH2.5-2P
- Cable Length: 20cm (8 inches)
- Noise: 61.30 dB-A
AIR FLOW-AIR PRESSURE CHARACTERISTIC
Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed.
- Max. Air Flow: 42.45CFM
- Max. Static Pressure: 41.10mm-H2O
RATED AND OPERATING CONDITLONS
- Rated voltage(VDC): 12V
- Rated current(A): 0.95A
- Rated input power(W): 11.4W
- Rated Speed(RPM/Min): 2800±10％
- Startup voltage(VDC): 7V
- Operating voltage(VDC): 7.0-14.0V
- Operating temperature(℃): -10℃-+70℃
STRUCTURE AND FORM
- Bearing: Dual Ball Bearing
- Structure: Cross flow fan
- Housing: PBT+GF30%
- Blade: PBT+GF15%
ELECTRICAL PROTECTION
- Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec.
- Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won’t be burned within 5 sec. when Vcc &GND are exchanged.
- Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires.
- Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires
UTUO-USPTO# 86955715 – is a registered trademark protected by US Trademark Law. JUTUONIX products are sold by authorized sellers only.
2. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24
Feature
- Rated Voltage: 24V DC, Current: 0.06A
- Bearing Type: Dual Ball Bearings, low noise, long life:50000H
- Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA
- Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm
- Warranty: 2-years, Package: 2x 24V DC brushless fans
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A
Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
3. Noctua NF-F12 iPPC 3000 PWM, 4-Pin, Heavy Duty Cooling Fan with 3000RPM (120mm, Black)
Feature
- Award-winning 120x25mm fan with FocusedFlow frame for high static pressure and superior cooling efficiency
- High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
- 12V 3000rpm model (43.5dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 750-3000rpm speed range
- Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection
- Trusted Noctua quality with premium-grade SSO2 bearing and more than 150.000 hours MTTF, backed up with 6-year manufacturer’s warranty
- NF-F12 industrialPPC-2000 provides a significant performance boost over the 1500rpm retail version. Combined w/ the industrialPPC series’ robust polyamide construction & adv. protection features makes the fan ideal for challenging industrial applications.
- Noctuid’s industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency.
- While the standard NF-F12 is one of the most energy efficient 1500rpm 120mm fans on the market, the industrialPPC version’s three-phase motor provides a further 10% reduction in power consumption when compared at 2000rpm.
- Both the impeller & the frame of Noctuid’s industrialPPC fans r made entirely fr fiber-glass reinforced polyamide that can withstand temp
- The motor & PCB of the IP67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection & effective motor heat dissipation.
- Design for pressure demanding appps like heat sinks & radiators, the Focused Flow frame features 11 stator guide vanes that straighten, channel & focus the airflow which allows the NF-F12 to rival the performance of conventional fans running at faster speeds.
- The NF-F12’s stator guide vanes r set out in Varying Angular Distance & feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan’s sound pattern more agreeable to the human ear.
- Custom designed for the new Focused Flow frame and to work in tandem with the eleven stator guide vanes, the NF-F12’s seven blade Heptaperf impeller has been carefully optimized to achieve a perfect balance between power and quietness.
4. URBEST 90mm x 25mm DC 12V 2Pin Cooling Fan for Computer Case CPU Cooler
Description
Application to car seat, computer, electrical appliances, tools, machine, units, power supply, network equipment, office equipment, lighting, shoe ark, sanitary equipment children toys, supply of heat dissipation problems, reducing equipment working environment temperature, prolong the service life of equipment. The mounting screws are not included.
5. Bgears 90 mm 2 Ball Bearing High Speed High Performance Fan, Translucent Black (b-PWM 90 Black 2ball)
Feature
- Speed range from 500 to 4000 RPM with Excellent Airflow of up to 88 CFM
- 9 translucent Black blades design for ultimate airflow and low noise level at only 39dBA
- PWM Technology with mini 4 pin 4 wire connector to connect directly to the Motherboard fan connector for ultimate fan speed monitoring
- 2 ball bearing designed for high speed and high performance
- Include a 3 to 4 pin Molex adapter for direct connection to Power Supply.
Description
Bears b-PWM 90mm Black 2 ball bearing high speed high performance PWM technology fan. PWM Technology with mini 4 pin 4 wire connector to connect directly to the Motherboard fan connector for ultimate fan speed monitoring thru Motherboard. Extreme Speed range from 500 to 4000 RPM with Excellent Airflow of up to 88 CFM. 9 translucent Black blades design for ultimate airflow and low noise level at only 39 db. Mini 4 pin 4 wires connector with PWM fan speed signal output. Include a 3 to 4 pin Molex adapter for direct connection to Power Supply. 4 screws included. Customer Service: Supportatbgears.com or call 510-657-7252. RMA Service: RMAatbgears.com or call 510-657-7252.
6. PLUSPOE 24V Brushless DC Cooling Fan 40mm x10mm Speed 6800 RPM Fans for 3D Printer Humidifier Aromatherapy and Other Small Appliances
Feature
- Brushless cooling fan 24vdc 0.06A 40mm x 40mm x10mm Speed 6800 RPM Fans for computer case 40mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans
- Bearing Type: Dual Ball Bearing, Speed: 6800 RPM, Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright.
- Connector: 2 Terminal Connector with 2pin-ph2.5
- compact motor design, the NF-A4x10’s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10’s superior airflow and pressure performance.
- Airflow: 7.56CFM, Speed: 6200PRM, Noise: 27.50dBA
- Warranty: two years, Package: 1x 24V DC Brushless Fans
Description
Package Included: 1 x 24V DC brushless fans.
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 9 Blades (Provide Bigger Airflow than 7 Blades), Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4VDC
Start-up Voltage: 20V DC
Rated Current: 0.03A (0.05A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6800RPM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.5 dB(A)
Conform to RoHS: Yes
Safety Approvals: CE ROHS
Life Expectancy: 50000H at 25degree test
Net Weight: 18.7g
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
7. ANVISION DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A
Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
8. Noctua NF-A14 iPPC-3000 PWM, 4-Pin, Heavy Duty Cooling Fan with 3000RPM (140mm, Black)
Feature
- Award-winning 140x25mm A-series fan with Flow Acceleration Channels and Advanced Acoustic Optimisation frame for superior cooling efficiency
- High-speed industrialPPC version for industrial heavy-duty applications that require extreme cooling performance and advanced ingress protection
- 12V 3000rpm model (41.3dB) with 4-pin PWM connector for automatic speed control via 4-pin PWM fan headers, broad 800-3000rpm speed range
- Ruggedised fibre-glass reinforced polyamide construction and IP52 certified water and dust protection
- Trusted Noctua quality with premium-grade SSO2 bearing and more than 150.000 hours MTTF, backed up with 6-year manufacturer-warranty
9. DC Brushless Cooling Fan, UCEC 4010 24V DC Axial Fan 40x40x10MM 2Pin for Computer Case, 3D Printer Extruder Humidifier and Other Small Appliances – 2 Pack
Feature
- Provide with Enough Airflow — Thanks to upgrade bearing system, UCEC Brushless Fan can reach 7000 RPM and provides an enormous amount of airflow, 7 pieces of blades get a better heat dissipation effect. Ball and Sleeve Bearing system allows the fan to be laid flat or stand upright.
- Safe & Quiet — CE, FCC, RoHS compliant and electrical protection, keep your 3D printer or computer running smoothly. Effectively solve the overheating problem of your computer or 3D printer. Anti-Vibration Design makes this Brushless fan can run so quietly that you can’t feel it.
- Well Built — Bearing System: Ball and Sleeve Bearing
- Speed:7000 RPM
- Air Flow:7.5 CFM
- Noise Level: 32 dBA
- Connector: 2pin-ph2.5
- Rated Voltage: 24V DC
- Power cable Length: 360mm.
- Unique Design — UCEC Brushless Fan can provide with large air flow
- low noise
- long span life
- good running stability and corrosion resistance.
- Compatibility — Designed for project that requires cooling or ventilation
- also can be used as a replacement fan for various products. Suitable for computer case, 3D printer, humidifier and other small appliances.
Description
UCEC DC Brushless Cooling Fan is design for computer Case, 3D Printer Humidifier and other small appliances.
Features:
Electrical Protection: Electronic circuit protection, impedance protection and temperature control protection.
Specification:
Frame Material: Plastic PBT UL94-V0
Blades Material: Plastic PBT UL94-V0
Rated Voltage: 24V DC
Bearing System: Ball and Sleeve Bearing
Storage Temperature:-30℃ — 70 ℃
Size: 40x40x10MM / 1.6×1.6×0.39inch
Blades Diameter: 38 mm
Connector: 2pin-ph2.5
Operation Voltage Range: 18-26.7V DC
Current: 0.09 Amp
Input Power 1.68 W
Speed:7000 R.P.M
Air Flow: 7.5 CFM
Noise Level: 32 dBA
DC Line Length: 360mm
Weight: 15g
Color: Black
Installation:
Step 1: Install the screws and nuts on the fan
Step 2: put the fan on the computer case and then use screw driver to screw it up carefully
Step 3: Connect the cable to the fan connector
Package Includes:
2 x UCEC 24V DC Brushless Cooling Fan
10. be quiet! Pure Wings 2 120mm high-Speed, BL080, Cooling Fan
Feature
- Nine airflow-optimized fan blades that reduce noise-generating turbulence
- Long life rifle bearing gives an operating lifetime of 80, 000 hours
- A fan speed of 2, 000 rpm for extremely high air pressure
- Even at maximum speed, operates at only 35. 9 dB(A)
- Product conception, design and quality control in Germany
Description
The Pure Wings 2 120mm high-speed fan offers excellent be quiet! Cooling in the entry-level class. The extremely high air pressure makes it the perfect choice for any system. Pure Wings 2 high-speed fans offer the highest level of reliability and excellent cooling with a nearly unbeatable price-performance ratio. Nine air flow optimized fan blades to reduce noise-causing air turbulence The durable rifle bearing provides an operating life of 80, 000 hours Even at maximum speed, the fan only reaches 35. 9 dB (A) Product concept, design and quality control in Germany Three years manufacturer’s Air flow optimized fan blades For a perfect cooling. The fan blade surfaces are optimized to increase airflow and air pressure while reducing noise-causing turbulence. The recipe for effective cooling of Pure Wings 2 fans. The Pure Wings 2 120mm high-speed fan is at maximum capacity only at 35. 9dB (A). Rifle bearing technology The Pure Wings 2 120mm high-speed fan stands for a very reliable operation and promises a very long life of up to 80, 000 hours. Technical Details Dimensions: 120mm Revolutions at 100% PWM / 12V (rpm): 2000 Air flow @ 100% PWM / 12V (cfm / m3 / h): 65. 51 / 111. 3 Air pressure @ 100% PWM / 12V (mm H2O): 2. 23 Volume at 100% PWM / 12V (dB (A)): 35. 9
Conclusion
By our suggestions above, we hope that you can found Dc 90Mm Cooling Fan 24V High Speed Pressure for you.Please don’t forget to share your experience by comment in this post. Thank you!
