The Best Ender 3 Heating

Compatible with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.

Cartridge Heater Description:
Cartridge heaters is consist of a cylindrical stainless steel tube and thus provide a high corrosion prevention

The heating wire inside which is wound onto a ceramic core

The number of coils varies depending on the power, and provide a great uniform distribution of heat, which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures

The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the heat (the cartridge) is in direct contact with the heat sink (any solid, liquid, or gas)

Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

Package Included :
5*24V Cartridge Heater with 1m wiring

Note: The Ender 3 Extruder Head Kit Suitable for Creality Ender 3.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
Ender 3 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 24V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass – Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
5×1.75mm 0.4mm Brass Nozzle ( as free gift)

These are the official Creality 3D Printer Replacement Parts for Extruder Kits Which Works Prefectly for Ender 3 /Ender 3 Pro /Creality CR10 /CR10S /CR10S Pro /S4 /S5…

Material: Aluminum
Dimensions: 20*20*10mm(LWH)
Net Weight: 10g/pcs
Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)
Heater Mounting Hole: 6mm diameter
Thermocouple Mounting Holes:3mm diameter
Suitable for Creality /Ender /Makerbot 3D printers
>br> Package List:
3PCS Silicone Covers
3PCS Aluminum Heater Block
3PCS Stainless Steel Extruder Nozzle Throat

Please noted that the pins is clamped with long nose pliers.

Specification:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)

Package included:
Hot End Kit(Concluded Capricorn Teflon tube)
3*0.4mm Nozzle
3*Silicon Cover

Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.

This hot end is a replica of the newest, popular V6 hotend, this hot end not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates typical hotend meltdown failures associated with other types of hotends.

Features:
1.Hot End 100% original and high quality 3D Printer accessories for Ender 5
2.The Hot End work with different sizes of MK10 nozzle: 0.2mm /0.3mm/0.4mm/0.6mm/0.8mm/1.0mm nozzle
3.MK10 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W

Specifications:
Material: Aluminum & Stainless Steel & Brass
Tip of the nozzle:aluminum heating block
throat pipe (built-in Teflon)
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range： -40 ~ +260°C

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 24V 50W Ceramic Cartridge Heater

UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, we are diligent to Do Our Best!

Note: These are original replacement parts for Creality 3D Printer Ender 3 / Ender 3 Pro / Ender 3X

Specifications of Heater Bed:
Model: dc24v 220w Aluminum hotbed for 3D Printer Ender 3
Product process: Aluminum Substrate
Hot Bed Size: 235x235x3mm
Voltage: 24V
Power: 220W
2) Specifications of Printing Build Surface:
Creality 3D Printers replacement Parts Printing Build Surface for Ender 3
Size: 235mm x 235mm
Color: Black
Background is made of 3M adhesive, easily stick on the heater bed platform.

Features:
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling
clean removal of the printed part afterward
Compatible with ABS, PLA, HIPS and the other filament
Single sheet design installs more quickly and with fewer bubbles than tape or films
Durable construction allows for multiple uses with either the same or different filament material

HOW TO USE THE BUILD SURFACE:
There are 2 methods to attaching the build surface on heater bed:
1. clamp the build surface to the print bed using binder clips（at least 3 clips)
2. Torn off 3M tape on back and stick it on heater bed.

Package List
1 × Aluminum DC24V 220W Heater Bed 235x235x3mm With Cable Which be installed well
1X 3D Printing Printer Build Surface.

Product Description:
– Material: Aluminum+Stainless Steel+Brass
– Installation type: External thread connection
– Application: Creality Ender 3, Ender 3X, Ender 3 Pro
– Nozzle size: 0.4mm
– Thermistor and heater cable length: 1M
– Throat pipe length: 30mm
– Aluminum block size: approx. 20 x 20 x 10mm
– Operating temperature range: -40~+260°C (-40~+500°F)

Packing List:
1 x Aluminum Block
1 x Heating Tube
1 x 0.4mm Brass Nozzle
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor + Brass Sleeve

20 Pieces yellow heating bed spring die head spring 3D printer compression spring 0.31 in OD 0.78 in length, compatible with Creality CR-10 10S S4 Ender 3 heating bed spring bottom connection level

Compatible with:
These yellow bed springs are compatible with most 3D printer heating beds, Ender 3, Ender 3 pro hot bed springs, flat top and hard springs.

Specifications:
Load class: light load
Color: yellow
Size: hole diameter (OD) : 0.31 inch/ 8 mm, rod diameter (ID) : 0.16 inch/ 4 mm, length: 0.78 inch/ 20 mm
Material: metal

Package includes:
20 x Yellow die spring

Additional tips:
In general, there are yellow, blue, red, green, brown spring according to the different load classification, mold spring is mainly applied in mold machinery. For the mold spring, the yellow here indicates the load class is light load which is very suitable for high stress applications, but also for a variety of other applications.

Note:
The brands or models we mentioned are only for expressing products adaptability, not for trade mark using, our trade mark is Mudder, kindly noted.
There are many small parts in the package. For the sake of safety, keep away from children.
Due to the different screen brightness and brightness, the actual color of the project may be slightly different from the picture shown on the website, please understand, but it does not affect the use of the function.