Top 10 Frosted Sfot Tubing Water Cooling

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.

Model: TR-3831109841396-4P

Using metric size fittings? The Bykski Acrylic tubing is crystal clear and easy to work with. Sold as a 4 pack , each stick is 750mm long giving you plenty to outfit your entire system!

Features

• Easy to Cut
• High Transparency
• Easy to Bend

Specifications

• Inner Diameter (ID): 12mm
• Outer Diameter (OD): 16mm
• Wall Thickness:2mm
• Length: 750mm
• Pack Size:4

Compatibility
• Fittings:16mm OD Rigid

Parts Included

• 4 Pieces of 750mm Acrylic  tube

Warnings

With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Acrylic Tube works with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.

Not responsible for any damage caused by or when using this product. Please use at your own risk.

InstallationPLEASE NOTE: A bending insert is meant to have a tight fit. If it is loose, the rigid tube will collapse, kink, form air pockets and flat spots when heated. The tighter the fit, the better the result. This process requires patience, but will become easier the more you practice.The bending insert requires some stretching and lubricating to get it in the rigid tube. Steps to success are below:1. Stretch the bending insert. Remove any excess that isn’t stretched.2. Ream the rigid tube with an RFB for best results, (or a hand reamer if that’s all you have). This will ensure a clean opening for easier insertion.3. Lubricate by applying several drops of dish soap, olive oil, or Tube Lube on the bending insert itself and then place several more drops into the rigid tube.4. Work the bending insert into the rigid tube. The more you use the insert, the easier this process will become.

Thermaltake introduces the V-Tubler PETG (4-Pack) hard tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with an 16mm OD / 12mm ID tube size, the PETG tube easily secures to 16mm fittings to give users better mounting, fitting, and flow. Make your pipe dreams a reality with endless possibilities to connect your vital components together for an unrivaled presentation.

Thermaltake introduces the V-Tubler PETG solid tubing for custom PC water cooling configurations. Manufactured from premium PETG, the V-Tubler rigid tubing allows users to route the tubes runs exactly to their heart’s content. Designed with 5/8” (16mm) OD PETG tube adapter fittings, give users better mounting, easier fitting, and ideal flow. Choose from: 500mm and 1000mm to make your system a showcase for all to see with the Thermaltake V-Tubler water tubing.

• Material: PETG
• Inside Diameter: 12 mm
• Outside Diameter: 16 mm (5/8”)
• Length: 100 cm *4
• Color: Transparent

XSPC PETG tubing is highly transparent and the extra thick 2mm wall thickness makes the tubing easier to bend without deforming. Each pack contains eight 50cm lengths. For use with XSPC fittings only.

Model: TR-5060175585943-8P

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Straight Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. Sixpack: Since six connectors of one type are frequently required, Alphacool now offers sixpacks. This has many advantages to your benefit! Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 20mm Height: 27mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting G1/4 – deep black sixpack

Deep, intense colors, pleasant handling and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue or black. When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes the color comes from the tubes themselves. Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radiuses and easy handling in tricky situations were also taken into consideration during development. Hence the plastic mixture was developed to perfection and we have created tubing which manages to combine usually opposing properties to please both beginners and advanced users. Technical specifications Material: PVC Color: Transparent Inner diameter: 10mm, 3/8“ Outer diameter: 13mm, ½“ Wall thickness: 1,5mm, 1/15“ Extent of delivery 1x Alphacool Schlauch AlphaTube HF 13/10 (3/8″ID) – Klar 3m (9,8ft) Retailbox

Bitspower Crystal Link Tubing with 16mm outer diameter and 1 meter long. Compaible With Bitspower Fitting C89/EML16 Series. For use with Bitspower fittings only.

Model: TR-BP-NCCLT16AC-L1000-4P

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0.5mm x 45° chamfer.

Model: TR-3831109841402-4P

HardTubes enjoy great popularity, and Alphacool is constantly offering new products in this area. Anyone who want to see clear, clean lines in their computer can hardly go without them. The most popular HardTubes are clear and transparent. HardTubes made of brass and carbon are also catching on. Now, under its “Eis” product line, Alphacool is offering the “Eisrohr”. Its surface gives off the appearance of ice and feels like it too – somewhat rough, but still smooth. With the “Eisrohr”, you effectively change the look of your system. You can especially see its true effects after refilling the system. The water has the appearance of frosted ice. With clear HardTubes, when the system is lit by LEDs, you see the reflection of each individual LED very clearly. Not so with the “Eisrohr”. Instead, the light is diffused and you get a softer, better illumination. Notice: The “Eisrohr”, like all acrylic HardTubes, can be bent with the proper bending tools. Technical Details: Material: PMMA (acryl) Length: 80cm Scope of delivery: 1x Alphacool Eisrohr 16/13mm plexi (PMMA) satin 80cm – 4pcs