Top 10 Goulds 4 Hp Well Pump With Motor

The J7 is specifically designed for homes farms cottages and booster services. Its Convertible design may be used on shallow or deep well applications using appropriate fittings.This pump features a back pull-out design two compartment motor for easy access to wiring nozzle clean out plug in shallow well adapter and is corrosion resistant. Volts: 115/230, amps: 14.8/7.4

Product Description

Ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells to depths of 250′.

From the Manufacturer

This submersible deep well pump is ideal for 4-Inch I.D. or larger wells. It features a built in check valve, 12-GPM and built in suction screen.

Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down Lexan diffuser has stainless wear ring for extended performance in abrasive conditions. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coat paint is baked on. Protected Mechanical Seal: Diaphragm retains water in the casing to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself. APPLICATIONS Specifically designed for: Homes Farms Cottages Booster service SPECIFICATIONS Pump: Pipe connections: 1¼” NPT suction, 1″ NPT discharge, 1″ NPT drive (pressure) Pressure switch: AS4 preset at 30-50 PSI Motor: NEMA standard 60 Hz 1/2 HP, 115/230 V capacitor start Single phase 3500 RPM Built-in overload with automatic reset Stainless steel shaft Rotation: clockwise when viewed from motor end UL778 listed Maximum temperature: 140°F Pressure regulator included. Pumps are manufacturer tested and may contain water inside from such testing

This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled

4″ deep well submersible pump. 2 HP, 230V, 10.2 Amps, 12 stage, 1-1/4” NPT discharge Industrial grade heavy duty, also good for home usage
* Fits a 5″ or larger well casing.
* Patented impeller & 12 stage design. 35GPM max & 400ft head are greater than almost all other 2HP well pumps, and comparable to 3HP pumps, but uses less electricity.
* Unique floating impeller design, premium seal, and UL qualified motor provide long life for this pump.
* Water temperature: (32 ~113of) Trans medium’s Ph.: 6.5~ 8.5
* Shell, motor shaft are made with stainless steel to ensure corrosion resistance.
* High quality sealed ball bearings guarantee its excellent performance.
* Built in check valve included. Installing external check valve(s) is required.
* Hermetically sealed motor with capacitor start, and thermal protection to prevent overheating, for longer life and powerful start.
* Built in control box. This pump DOES NOT require an external control box!
* This pump uses high quality and high efficient UL approved motor, UL file No.: E233961, for less energy and long pump life.
* This is a 2 wire pump with 3-Wire (2 wires + ground wire) 10′ long electric cord included.
* Heavy-duty thermoplastic impellers, diffusers, and intake screen.
* Unique design reduces its noise. User’s manual and installation tape kit included.
* 400 feet max head is for open water tanks. Refer to the ‘Pump Selection Guide’ for the pressure tank applications.
* Warranty: 12 months manufacturer’s warranty

Compact: Design has an integral shallow well adapter built into the casing, which eliminates the need for a separate shallow well adapter. SERVICEABLE: Back pullout design allows disassembly of pump for service without disturbing piping. Two compartment motor for easy access to motor wiring and replaceable components. Nozzle clean out plug in pump case. Corrosion resistant, engineered plastic tubing and fittings are easily removed for cleaning. Premium O-ring Impeller: F. D. A. compliant, glass filled Noryl. Corrosion and abrasion resistant. Diffuser (Guide vane): Bolt down diffuser provides positive alignment with impeller. Diffuser also has stainless wear ring for extended performance in abrasive conditions. F. D. A. compliant, injection molded, food grade, glass filled Lexan for durability and abrasion resistance. Tubing and Fittings: F. D. A. compliant engineered plastic is corrosion and U. V. resistant. Powered for Continuous Operation: Pump ratings are within the motor manufacturer’s recommended working limits. Can be operated continuously without damage. Corrosion Resistant: Electro-coated paint process is applied inside and out, then baked on. Protected Mechanical Seal: Special diaphragm design retains water in the casing at all times to ensure the mechanical seal can never run dry. Excellent Air Handling Ability: After initial priming the pump has the ability to re-prime itself even when air gets into the system. Pumping resumes once the water level rises above the foot valve. Specifically designed for the following uses: Homes, Cottages & Booster service MAXIMUM TEMPERATURE: 140°F. SYSTEM COMPONENTS: Basic Pump Unit: Includes pump with integral shallow well jet (nozzle and venturi), motor, pressure switch and tubing. NOTE: Pumps are manufacturer tested and may contain water inside from such testing

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX!

Our Deep Well Pump is ideal for the supply of fresh water to rural homes, farms, and cabins that have 4 inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT ‘Manufacturer Refurbished’.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The well pump submersible is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built in check valve, however this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won’t fulfill that function.

-1 year warranty.

NOTICE: Our pumps are checked for physical damage before they’re shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it to Amazon if you see any.

NOTICE 2: This pump is designed to be used in clear pure water only, even an small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.

Product Description

The Wayne WLS200 230-volt cast iron sprinkling pump pumps up to 2320-gallon per hour at 30 psi. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.

From the Manufacturer

The Wayne WLS200 230-Volt cast iron sprinkling pump pumps up to 2320-Gallon per hour at 30 PSI. It’s features include a durable cast iron volute and corrosion-resistant, reinforced thermoplastic infuser and impeller. The pump is designed to operate underground sprinkling systems, draw water from well, lake or ponds for watering, pool filling or any other applications where high water column is needed.