837 reviews analysed
1. 1/4“od Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight 8pack (1/4" Combo)
Feature
- utah pneumatic: push to connect air and water Pressure Range: 0-1 Mpa145 psi Max pressure:1.5 Mpa/ 217 psi/15 bar Temperature Range 0-60°C | 32～140°F Applicable Tube: PU/NYLON/Soft PE hose fitting
- Easy to install This tube connector is available in various styles and models . Each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly
- You can easily change the tubing connector direction even after installation. The release ring of conforms with the ellipse design to ensure that the disconnecting of connect push is in good shape
- All push to lock contains internal hexagonal holes this enhances the installation process in a narrow space.push connect fittings Can be dismantled and assembled easily These Push In Fittings Meet The Pressures And Temperatures Mentioned
- At Extreme Temperatures In Places Close To Heat Sources we Would Recommend Our Connect Push Brass Which Is More Resistant To High Temperatures We Are Ready To Answer Any Questions Related To Our Connect It Fittings
Description
User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.
2. Tailonz Pneumatic Male Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PC-1/4-N1(Pack of 10)
3. SNS SPL1/4-01NPTBE 1/4"Tube OD x 1/8 NPT Male Elbow Nickel Plated Brass and Plastic Pneumatic Tube Fittings(10 PCS)
Feature
- Made of high-quality plastics and nickel-plated copper for durable use
- Type: Quick Connect Fitting Connector
- Advantages: Easy installation and disassembly, good sealing performance
- Fluid type: air, vacuum
- Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa
- Working Temperature: 0-60°C
- Applicable pipe: PU/PA/PE/PVC
4. Utah Pneumatic 10 Pack Plastic Push to Connect Air Line Fittings Tube tee Connect 1/4 inch od Push Fit Fittings Tube Fittings Push Lock (1/4 inch tee)
Feature
- Type:air hose fittings/push fit/Push to connect tee shape Weight: 2.7 ounces/Size:1/4 inch od
- Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:| 120psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel (SUS)/Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
5. Brennan PCNY2501-08-06 PBT Push-to-Connect Tube Fitting, 90 Degree Elbow, 1/2" Tube OD x 3/8" NPT Male
Feature
- 90-degree elbow for connecting two pipes or fittings at an angle
- Push-to-connect fitting connects to pipes or tubing on one end and has an NPT male connector on the other
- Made of polybutylene terephthalate (PBT) for resistance to solvents, shrinkage, heat, and impact
- Working pressure of up to 290 psi
- Operating temperature ranges from -4 to 175 degrees F
Description
The Brennan PCNY2501 series 90-degree elbow fitting is made of polybutylene terephthalate (PBT) and has tube and NPT male connectors. This 90-degree elbow fitting, or “ell,” connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a National Pipe Taper (NPT) male connector on the other. The fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact, and it can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 290 pounds per square inch (psi), and its operating temperature ranges from -4 to 175 degrees F.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Brennan Industries manufactures critical flow components. The company, founded in 1953 and headquartered in Solon, OH, meets International Organization for Standardization (ISO) 9001:2008 standards and its fittings meet Society of Automotive Engineers (SAE) specifications.
6. Malida Quick Push to Connector, Water Tube Fitting,1/4" Tube OD x 3/8" Tube OD Reducing Straight Union,for RO Water Systems,Water Purifiers Tube Fittings,Pack of 10.
7. YZM 3/8" OD Quick Connect Push in to Connect Water Tube Fitting (3/8" Quick conncet)
Description
No tools required,Push fit fittings Easy to use,Mini quick connect push tee 1/4-Inch OD Push fit fittings,Quick Connect Fitting 3/8″ RO Water System Standard fitting for water filter systems using 6mm water filter tubing
8. SNS SPM-1/4 Tube OD 1/4 NPT Bulkhead Union Nickel Plated Brass Push to Connect Fittings 10 PCS Per Pack
Feature
- Made of high-quality plastics and nickel-plated copper for durable use
- Type: Bulkhead Push to Connect Fittings
- Advantages: Easy installation and disassembly, good sealing performance
- Fluid type: air, vacuum
- Operating Pressure: 0-0.9Mpa,Proof pressure:1.32Mpa
- Working Temperature: 0-60°C
- Applicable pipe: PU/PA/PE/PVC
9. Utah Pneumatic 10 Pack Plastic Push to Connect Fittings Tube Connect tee 3/8 inch od Push Fit Fittings Tube Fittings Push Lock (tee 3/8)
Feature
- Type:air hose fittings/push fit/Push to connect Tee shape / Weight: 2.7 ounces/Size:3/8 inch od
- Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect fitting water (no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel(SUS)/Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
Description
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Utah Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Utah Pneumatic composite should not be used for live swivel applications.
Body and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
10. Utah Pneumatic 6mm od to 6mm Push to Connect Fittings Pneumatic Fittings kit 2 Spliters+2 Elbows+2 tee+2 Straight+1 Manifold+ Hand Valves Ultimate Professional set10 Pack Plastic (6mm Combo)
Feature
- Type:air hose fittings/push fit/Push to connect Tee+elbow+y spliter+Straight+valve+Manifold/ Weight: 2.7 ounces/Size:6mm
- Fluid Admitted:Air Vacuum Water liquifit push to connect fitting kits quick connect t fitting water setup irrigation lines(no freezing)
- Working Pressure:0-1.0MPa | 0-150psi/Applicable Tube:PU / PA / PE / PVC
- Proof Pressure:3.0Mpa | 435psi.Seal O-ring:NBR/ Lock Claw:Stainless Steel(SUS)/Body:Plastic(PET)
- Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg
Description
Utah Pneumatic Fittings are a compact one piece push-to-connect fitting.
All items in the Utah Pneumatic composite range are silicone free.
The Stainless steel gripping ring ensures excellent tube retention while the D seal
within the fitting provides a positive seal on the O.D. of the tube,
in both static and dynamic positions, due to an optimized design of the fitting cavity.
Utah Pneumatic composite should not be used for live swivel applications.
Body and collar are made of Nylon 6.6, gripping ring is stainless steel, and D seal and O-rings are Nitrile.
Conclusion
By our suggestions above, we hope that you can found Press Fit Vacuum Fitting for you.Please don’t forget to share your experience by comment in this post. Thank you!
