Top 10 Shark Fin Mazdaspeed 6

genuine oem part

Specifications：

material: Engineering plastic surface piano paint

weight: 120g

Size: 170*72*75mm/6.7*2.8*3.0inch

color: black, white

a fixed way: Double-sided adhesive fixed

Adaptation environment: Roof wing installation

Note: Make sure the shark fin antenna can be attached to the roof after receiving the signal.

Features: 

1.The top wing of this car adapts to most car brands, and the general type is highly consistent and applicable.(Please check the size before you place the order)

2. Function combined with current aerodynamic design to reduce air resistance, release static electricity, reduce noise, etc.

3. Waterproof, dustproof, anti-exposure, sturdy and drop-proof, etc. Silent speech can be removed when it is raining or when washing.

4. Connected to the radio board, connected to the original body of the antenna, can be used to strengthen the model of the electric wave, etc.

5. Easy installation with the self-adhesive, no drilling required, just clean and dry your car, stick the fin on the surface. strong paste, not easy to fall off.

6. Shark fin antenna with FM/AM connection cable inside.

7. Shark fin antenna with radio function, concision and modern, making your car cool and distinctive

Packaging includes：

1 * Car Shark fin antenna

EASY DIY UPGRADE FOR YOUR SUBARU WRX

Are you looking for a vortex to upgrade the look on your latest ride? This carbon fiber trim is just what you need. It is compatible with Subaru WRX STI 2015-2018 car models. Click ‘Add to Cart’ now to get one for yourself today!

The covers are designed for a perfect fit, and add a lovely aggressive look to your car. Combine that with the sporty look of your Subaru, and you have yourself a car that you are going to love driving around town.

Nothing but the best for you!

We used the best quality dry carbon fibers to make this cover, and is made for a perfect fit. It is also designed to stay in place permanently, and will not come off even after years of use.

What is more, each  cover has a UV-Resistant coating to keep it looking good as new for the longest time.

Update the look on your car today. Each purchase comes with a satisfaction guarantee. It is a zero-risk purchase for you.

Install instructions:

Before installation, Please keep the surface clean and dry, no sand/dust

Please keep the product out from moisture and dust within 24 hours after installation

Step I : Gently tear off the 3M Tape with steps, do NOT tear it at once.

Step II : Apply the cap onto the OEM part along with tape adjustment. REMEMBER to do it slowly and gently

Step III : Tear off all the tape until you feel the cover cap has been well fitted.

Important :

When buying, please check the year of your car and the models of your car carefully. If you have any question about our product, please Feel free to contact us.  Your satisfaction is our most concern, please contact us to resolve any issue before leaving any neutral or negative feedback.  

This super functional shark fin antenna is a replacement part for your original antenna.
It can enhance the signal and achieve the purpose of decoration, let your car look more cool and distinctive.

Features:

• Very nice Shark Fin design idea- concision and modern, making your car cool and distinctive
• Universal fit with most Auto SUV truck etc
• Using the copper as a signal amplifier, give more stable and stronger signal when driving
• Easy to install, no drilling required
• If the size of your original antenna’s base is bigger than the dimension-approx. 3.19”x2.48” /148mm*67mm, this shark antenna will not fit your car

Specifications:

• Material: High-Quality ABS Material
• Product weight: 2.5 oz / 70 g
• Product size: 3.2 x 3.2 x 6.7 in / 8 x 8 x 17 cm

Package Includes:

• 1x Shark Fin Antenna

Specifications:

– Size: 98-3/8″L x 2-9/16″W(250×6.5cm)
– Weight: 1.87Lbs

Installation method:

1. Convenient installation – the length can be adjusted to the best position of your car.
2. Clean the bottom of the bumper, preferably using alcohol to install the lip, which will ensure a firm combination with the bumper case.
3. Then peel off the double-sided tape and attach it to the front bumper lip. The degree of adhesion (adhesion or screw) can be selected. In order to achieve better adhesion effect, we recommend using screw and screws included in the package.
4. Install at the bottom of the bumper, starting from the end of the bumper.
5. Quick and easy way to add a front bumper lips, is almost any car aggression and reduce the appearance of flexible and durable materials, rubber carbon fiber design allows you to install the lower bumper.( The front lip of the car must be equipped with a self tapping screw, it is installed. Since the vibration wave of the automobile engine is relatively large, the screw will make (bumper separator/spoiler plate) stronger and will not fall off. Cut off the excess with scissors (note: don’t clean your car within 48 hours, glue should be fixed after 12 hours)

NOTE: ★If you need a stronger, more permanent attachment, you amy use self-taping screws to secure the lip to the bumper.

Package Contents:
Front Bumper Lip*1
Screws*5

Name:Bumper Lip
Size:250cm*wide 5.5cm/98.4 inch*2.16inch
Features: Universal for most cars/ trucks/ SUVS
Function: Guard Protection Rubber Skirt, anti-scratch and decorative
Scope of use:Stick it on front or rear bumper, body kit, side skirt, tail fins etc This product is made from high quality PVC Imported Carbon Fiber material, smooth cross section, flexibility:
Ultra light weight:
With adhesive, Perfect fit and easy to install
* Sturdy rubber material, soft and strong
You can also apply a liquid to shine it up and make it look beautiful colour!
Installation Guides:
1. Please keep the surface clean and dry, no sand/dust and put some adhesion promoter (Without) at it before installation.
2. Install the item from the middle, remove protective film from adhesive carefully.
3. radian Please cut a few triangles in adhesive tape, which is convenient for the turning.
4. Determine exact location of product, align carefully and then press firmly to insure proper adhesion.
5. more permanent attachment,you may use self-taping screws to secure the lip to the bumper.
6.Do not touch water after pasting within 72 hours
Package Includes:
1 * Roll Rubber Skirt 1 * Adhesion Promoter 1* carbon lip 1* installation manual 1*SAMURAI sticker 8* screw

★Fit 15-19 4D WRX / WRX STI ★Made of ABS Material.★100% Brand new never been used.★Fitment guaranteed.★Handling time: 15-20 days★Delivery: 2-3 days

Your MAST Broken, Stolen or Bent? This is a Very High Quality AFTERMARKET FUBA Style Replacement Antenna Mast/Whip designed for your Roof Mount Antenna. These Whip/Masts have the twisted wire that runs up the mast to reduce wind noise. Our Mast will be the Highest Quality non OE Mast you will find here On Amazon, Just Look at the photos of any competitors masts
Fitment:
2003-2017 BMW Z4
1996-2002 BMW Z3
1998-2006 BMW M3
2001-2006 BMW 330CI
2001-2006 BMW 325CI
1995-1999 BMW 323IC
1993-1999 BMW 318IC
1995-1999 BMW 318TI
2003-2012 Dodge Sprinter 2500
2003-2012 Dodge Sprinter 3500
2001-2005 Lexus IS 300
2002-2009 Mitsubishi Lancer
2010-2018 Mercedes Sprinter 2500
2010-2018 Mercedes Sprinter 3500
2002-2017 Mini Cooper
2004-2009 Mazda 3
2005-2010 Mazda 5
2003-2008 Mazda 6
2002-2003 Mazda Protege 5
2003-2009 Nissan 350Z
2003-2010 Pontiac Vibe
1998-2002 Saab 93 Viggen
2004-2011 Saab 93 Convertible
2000-2005 Saturn L Series
2005-2010 Scion tC
2004-2006 Scion xA
2003-2008 Toyota Corolla
2003-2013 Toyota Matrix
2001-2017 Toyota Prius
2004-2008 Toyota Solara
2007-2018 Toyota Yaris
1998-2010 Volkswagen Beetle
1990-1994 Volkswagen Corrado
1995-2002 Volkswagen Cabrio
1985-2006 Volkswagen Golf
1988-2009 Volkswagen Jetta
1990-2005 Volkswagen Passat
2006-2009 Volkswagen Rabbit
2009-2013 Volkswagen Tiguan
1996-2004 Volvo V40

***THIS ANTENNA WILL FIT OTHER VEHICLES NOT LISTED. IF YOUR VEHICLE IS NOT LISTED, EMAIL US TO CONFIRM YOUR FITMENT. ***