Finding your suitable readers for shelix dewalt 735 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for shelix dewalt 735 including detail information and customer reviews. Let’s find out which is your favorite one.
951 reviews analysed
1. Byrd Tool woodworking Shelix OEM Size cutterhead for Dewalt planer DW735
Feature
- This DW735 OEM cutterhead is machined slightly larger to give you a cutterhead that is the same size as the one you are removing. You will need to remove the inserts from the cutterhead prior to install, and then replace them after the cutterhead is in place.
- Staggered, spiral carbide insert configuration provides a shear, rather than straight cut for a smoother finish and quieter operation.
- Helical insert knife configuration breaks up chips, making dust collection easier.
- Replace individual inserts when dull or damaged, rather than having to replace an entire expensive knife blade
- comes with 5 replacement inserts.
- Made in the USA!
Description
The overall cutterhead diameter is the same as the original OEM head. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
2. Byrd Tool Shelix cutterhead for Dewalt planer DW735
Feature
- Cutterhead diameter is 0.088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts.
- C3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives.
- Spiraled to break up chips for dust collection, shear to give clean cutting action
- True helical cut (slices the wood) which greatly reduces noise and tearout
- Pocket for cutters makes replacing them easy and creates perfect alignment
Description
The overall cutterhead diameter is 0.088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide inserts. The ORIGINAL SHEar & heLIX and spiral cutter non-grind design. Woodworkers know that a shear cut is far better than a straight cut. You also know that a stagger cut is much better than just a single straight knife and is a lot easier on your dust collection system. If you just happen to plane a nail or staple, it is not necessary to replace expensive knives the full length of your planer head. Replace 2 or 3 small inexpensive knives and you are ready to go. The SHELEX is extremely quiet compared to other blades.
3. ELEPHAS – Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer DW735 Without Removing Inserts
Feature
- This cutterhead’s cutting diameter is 2mm less than the original cutterhead, which allows you to install it on the machine without removing inserts. The two bearings 6204+6202 are already installed on the cutterhead.
- Reduced noise and tear-out, produce much smoother finish on difficult woods.
- The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead.
- The indexable inserts allows you to rotate it if one knife edge is dull or nicked.
- Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches
Description
The cutting diameter of this head is 2mm slightly smaller than the original size, which allows you to install onto the machine without removing inserts.
The tool kit includes: 5 spare inserts/ 10 spare screws/ two T wrenches.
Also, our patented Double Layer Insert and screw make it much easier to mount the knives on the cutter head, it’s a user-friendly design; and it also eliminates insert breakage.
4. DEWALT DW735X Two-Speed Thickness Planer Package, 13-Inch
Feature
- Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30% longer knife life, fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Maximum depth of cut 1/8 inch, depth capacity 6 inches, width capacity 13 inches
- Includes infeed and outfeed tables and an extra set of knives.Drop feed rate to 14 feet/min.Planer Type:Stationary
Description
Product description
Includes 13-in Two-Speed Thickness Planer – DW735X, Dust Hose Adapter, Dust Ejection Chute, Extra Set of Knives, Infeed Table, Outfeed Table
From the Manufacturer
The DEWALT DW735X 13-Inch, Three Knife, Two Speed Thickness Planer has a powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) that handles larger cuts in wider materials with ease. The three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier. The two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI. It has a fan-assisted chip ejection that vacuums chips off of the cutter-head and exhausts them out of the machine. With a 19-3/4″ cast aluminum base it is 2X more rigid than a standard 10″ base and folding tables. The automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user. It also has a material removal gauge and extra-large thickness scale that deliver accurate cuts with every pass. The extra-large turret depth stop allows users to return to most frequently used thicknesses with ease. Includes infeed and outfeed tables and an extra set of knives.
5. Byrd Tool H8803 – Shelix Cutterhead 8" (G0490)
Description
Manufactured in the USA by Byrd, these indexable carbide insert cutterheads are very well made and leave a great finish. The inserts are positioned along a spiral pattern, and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest of woods. Each cutterhead comes with included inserts plus 5 extras.8″ Shelix (for G0490)—40 Inserts. FITS:Grizzly G0490Grizzly G0490XDelta DJ-20Shop Fox W1741Shop Fox W1741S
6. DEWALT DW7352 Replaceable Knives for DW735 13-Inch Planer
Feature
- N/A
- Imported
- Disposable, Reversible, M2 laminated high-speed steel blades stay sharper and last longer than conventional knife materials
- Machined locator pins make alignment of new knives fast and easy
- Manufactured in Taiwan
- M2 laminated tool steel stays sharper and lasts longer than conventional knife materials
- Machined locator holes help users align knives on cutter-head during knife change
- Generates a snug fit around pins on cutter-head
- Double sided for continual performance
- Cost effective alternative to sharpening
Description
Product Description
Disposable, reversible, M2 laminated high-speed steel blades stay sharper and last longer than conventional knife materials. Machined locator pins make alignment of new knives fast and easy. Manufactured in Taiwan.
Amazon.com
A planer is necessary for all wood finishing jobs, but a quality planer needs quality knives. The DEWALT DW7352 replaceable knives for the DW735 Planer help your planer get the job done well. Crafted from M2 laminated tool steel, these blades outlast the industry standard and are double sided for continual performance. The machined locator holes make installation a snap by aligning with the cutter-head. Choose these blades as a better, more convenient and cost effective alternative to sharpening.
7. Dark Stone spiral Cutter Head for Dewalt DW735 planer
8. Byrd Tool H7768-15" Shelix Cutterhead
Description
Made in the USA by Byrd, these indexable carbide insert cutterheads are very well made and leave a great finish. The inserts are positioned along a spiral pattern, and rotate at a slight angle for a shearing action that leaves a glassy smooth cut on the toughest of woods. Each cutterhead comes with included inserts plus 10 extras.15″ Shelix Cutterhead—75 Inserts. FITS:Grizzly G1021 seriesGrizzly G0550Grizzly G0551Grizzly G0453 seriesBridgewood BW15PDelta DC380Delta 22/675Delta 22/780Delta 22/785Delta 22-790XDelta 22-790X5General 30-115General 30-125CEJet JWP-15CSPowermatic 1791209-15Powermatic 1791210-15SShop Fox W1692Shop Fox W1723Shop Fox W1724Shop Fox W1742Shop Fox W1742SSunhill CT-38BSunhill CT-382Woodtek 855266
9. DEWALT DW735 13-Inch, Two Speed Thickness Planer
Feature
- Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
Description
Product Description
13″, heavy duty, portable 2 speed thickness planer.
Amazon.com
The DEWALT DW735 features a three-knife cutterhead and a powerful 15 amp motor that delivers 10,000 rpm. It offers quick, accurate depth adjustment and the convenience of knives that are both reversible and disposable. This fully featured portable planer makes it easy to create clean custom stock.
Powerful 15 Amp Motor for Clean Cuts
Benchtop planers are a long-term investment that allow you to save money over time by buying rough stock and dimensioning it yourself. They also make creating custom materials easier, which, in turn, makes getting great results easier.
The DW735 13-Inch Planer’s powerful 15 amp motor can handle deep cuts in tough hardwoods. Its three-knife cutterhead and two-speed gearbox deliver 96 or 179 cuts per inch (cpi). Use 96 cpi when dimensioning material and 179 cpi for a finer finish.
Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.
For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.
Large Capacity and Easy, Accurate Depth Adjustment
This planer’s extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.
In addition, the planer’s material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.
This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.
Fan-Assisted Chip Ejection for Dust Management
The DW735 features a Fan-Assisted Chip Ejection System with a motorized fan that breaks down debris as it leaves the cutterhead and blows it into one of the two dust shrouds (included). One shroud disperses the chips down onto the shop floor while the other provides a connection for a vacuum hose or dust-collector hose.
This sturdy planer weighs 92 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 13 inches.
The DW735 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.
What’s in the Box
DW735 DEWALT 13-Inch Thickness Two-Speed Planer with Three-Knife Cutterhead, dust-hose adapter, and dust-ejection chute.
Conclusion
By our suggestions above, we hope that you can found Shelix Dewalt 735 for you.Please don’t forget to share your experience by comment in this post. Thank you!
