879 reviews analysed
1. BACOENG 3 Gallon Tempered Glass Lid Stainless Steel Vacuum Chamber Perfect for Stabilizing Wood, Degassing Silicones, Epoxies and Essential Oils
2. ABLAZE 1.5 Gallon Gal Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies Lid Kit
3. YaeTek 2 Gallon Vacuum Chamber kit for Degass Urethanes Silicones Epoxies and Resins, Stainless Steel Vacuum Chamber with Lid, Gasket, Gauge, Hose
Feature
- Suitable for deaerated polyurethane, silica gel, epoxy resin, stable wood, filling mold, extract essential oil from organic materials, etc.
- Rugged stainless steel container with chemical-resistant silicone gasket
- Maximum rated vacuum: 29 inHg at sea level
- Maximum operating temperature :160°F
- Each compartment was tested before shipment and the loss did not exceed 2.5 inches of hg /24 hours
Description
Features:
durable stainless steel container with chemical-resistant silicone gasket
acrylic lid, high strength and drop resistance, provides safety
Industrial tables resist vibration and maintain accurate measurements
The shutoff valve turns, the vacuum pump closes, and the vacuum chamber can remain high for several hours
Specification:
Maximum Rated Vacuum: 29 inHg at sea level
Maximum operation temperature: 160°F
Dimension of the chamber: 9″Dia x 8″H (23x20cm)
Thickness of the lid: 11/16″ (18mm)
The length of the steel wire hose: 56″ (1.42m)
Dimension of the silicone pad(LxW): 8″ x 8″ (20x20cm)
Package Content:
1x Vacuum Chamber with Lid & Gasket
1x Gauge with Fittings
1x Hose
1x Silicone Pad
Explanation of compatibility:
incompatible with stable resins (e.g. cactus juice, crocodile venom, mink wax, etc.), alcohol, ethanol, acetone and acrylic monomers or polymers.The lid can only be washed with soapy water.
NOTE:
The hole on the acrylic lid may be smaller than the fittings. Our purpose is to avoid the situation that the hole is too large for the fittings. If the fitting hole is smaller, the customer can enlarge the hole to fit the fittings.
Hope you can understand if you meet such situation.
4. ABLAZE 3 Gallon Gal Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies Lid Kit
Feature
- Maintain high vacuum for over 24 hours
- Chamber tested before shipping
- LIFETIME warranty on Lid Seal and Chamber
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc
- Chamber Dimension: 10″ x 10″ (Without Lid)
5. ABLAZE Small Mini 2 Quart Vacuum Chamber Stainless Steel Degassing Urethanes Silicone Epoxies
Feature
- Chamber Size: 4.4”(H) x 6.3”(W) Get the suitable size to save your cost and time
- LIFETIME warranty on Lid seal and Chamber
- Perfect for applications like degassing urethane, silicones, epoxies, stabilize wood, extracting essential oils from organic materials, etc
- Chamber tested before shipping
6. BACOENG 3 Gallon Stainless Steel Resin Trap Vacuum Degassing Chamber (3 Gallon/1.2 QT/2 QT Available)
Feature
- Resin traps come complete with glycerin-filled vacuum gauge, fittings for use with 1/4″ vacuum tubing,brass ball valve and instruction manual.
- Capture excess resin and protect your pump! Measuring range of vacuum gauge:0-29.25inHg
- Unique Catch Port Design: An additional hose can be installed at the port inside the tank to facilitate accurate collection of resin.
- 5 Feet Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4″ SAE.
- Silicone gasket to be used over 10,000 times without deterioration.
Description
Protect your equipment! These vacuum-sealed tanks are installed in the vacuum bagging process between the mold and the vacuum pump to capture excess resin that enters the vacuum line before it can damage your equipment. Resin traps are an integral part of all vacuum infusion and vacuum bagging processes. Our Stainless Steel resin traps come equipped with clear lids that allow you to easily monitor resin accumulation.
Safety Information:
If large amounts of mixed resin remain in the feed pot or accumulate in the catch pot, the resin can become very hot indeed. In extreme circumstances, the resin can actually start smoking as it reaches very high temperatures.
Keep an eye of the catch pot and wait for the exotherm to die down.
TIPS:
Apply mold release to all interior surfaces of the resin trap prior to lay-up for easy clean-up once the vacuum process is complete.
Additional containers can be placed in the large 3 gallon tank to collect the resin.
This Kit Includes:
- 1 × Stainless Steel Pot
- 1 × Clear Lid
- 1 × Glycerin-filled Gauge
- 1 × Air Manifold
- 1 × Resin Catch Hose
- 1 × Vacuum Hose
Chamber Size:
- 3 Gallon 9.8″(ID) × 9.8″(H)
- 1.2 QT, 4.3″(ID)× 3.9″ (H)
- 2 QT, 5.1″(ID)× 4.3″ (H)
7. ABLAZE 8 Inch Vacuum Chamber Heat Pad for Stainless Steel Glass Aluminum Chamber
8. ABLAZE 2 Quart Stainless Steel Vacuum Degassing Chamber and 3 CFM Single Stage Pump Kit
Feature
- NOTICE: Pump Oil Not Included. Chamber tested before shipping
- Maintain high vacuum for over 24 hours
- 2 Quart Degassing Vacuum Chamber kit used to degass silicones, epoxies, essential oils, urethanes, etc.
- Vacuum Pump Voltage:110V 60HZ Power: 1/4 HP Single Stage 3CFM Oil Capacity:220ml
- Maintain high vacuum for over 24 hours
Conclusion
By our suggestions above, we hope that you can found Stainless Steel Vacuum Chamber for you.Please don’t forget to share your experience by comment in this post. Thank you!