The Best Usb Gps Receiver Laptop

The BU-353-S4 is a USB GPS receiver that features a highly sensitive, low power consumption chipset in a ultra compact form factor. The BU-353-S4 is powered by a SiRF Star IV GPS chipset, and will provide you with superior performance in urban canyons, and in dense foliage. With the SiRF CGEE (Client Generated Extended Ephemeris) technology, has the capability of predicting satellite positions for up to 3 days in advance, and will deliver a CGEE-start time of less than 15 seconds under most conditions without any network assistance. The BU-353-S4’s MicroPower mode allows the receiver to stay in a hot start-like condition almost continuously while consuming very little power.

Looking for a reliable GPS or GLONASS receiver solution?

This u-Blox chipset receiver is exactly what you need. U-Blox offers the latest in next generation GNSS technology with superior position accuracy in urban canyons. They also offer free U-Center GNSS evaluation software that can be downloaded from the u-Blox website. The U-Center software loads your device driver and includes extensive configuration and control features with real time display of your GNSS receiver.

Technical Specifications

Electrical Characteristics
GPS Chipset: U-blox 8 Engine
Frequency: GPS/QZSS L1 C/A L1
Frequency: GLONASS L1 FDMA
SBAS: WAAS, EGNOS, MSAS
Channels: 56
Sensitivity(Tracking): -162dBm @ GPS
Sensitivity(Tracking): -158dBm@GLONASS

Accuracy
Position Horizontal: Autonomous 2.5m/2m SBAS
Velocity: 0.1m/s
TIMEPULSE: 1 pulse per second, synchronized at rising edge, pulse length 100ms
Accuracy of time pulse signal: RMS 30 ns@GPS 50ns@Glonass
Accuracy of time pulse signal: 99% 60 ns@GPS 100ns@Glonass
Frequency of time pulse signal: 0.25 Hz 10 MHz (configurable)

Dynamic Conditions
Acceleration Limit: Less than 4g
Altitude Limit: 50,000 m
Velocity Limit: 500 m/s
Jerk Limit: 20 m/ second³
Heading accuracy: 0.5 degrees

Low Noise Amp
Amplifier Gain: 27 dB Typical
Filtering: -25dB (+100 MHz)
Output VSWR: 2.0 Max.
Voltage: DC 3 ~ 5.0V
Current: 15mA max @ 5VDC

Mechanical
Weight: 60 gram
Size: 45x38x15mm
Cable: RG174
Length: 2m
Connector: SMA
Mounting: Magnet base
Housing: Black

Some of our customer can use this device on Macbook with GPSD for BSD Linux, just Google it and follow the instructures.
Please Search U-CENTER V8.29 and install it. the usb serial port driver or sensor driver will automatically installed. then choose port or sensorAPI, this device will be work will.
This device Powered by a Ublox GPS chipset, High sensitivity and Strong Singal. The u-center GNSS evaluation software for automotive, mobile terminal and infrastructure applications provides a powerful tool for evaluation, performance analysis and configuration of u-blox GNSS receivers. Its unique flexibility makes the u?center GNSS evaluation software an invaluable tool for evaluation, analysis and configuration of u-blox GNSS receivers. u-blox GNSS receivers can be configured using the u-center evaluation software

Electrical Characteristics:
1.GPS Chipset: U-BLOX UB-6010
2.Sensitivity: -162 dBm ~-158 dBm
3.Channels: 56 channelS

Features:
Supported operating systems: Windows10/ 8/7 / Vista / XP / CE
VK-172 baud rate automatically adapt to any baud data output
Supported Google Earth
Ublox 7020 chip
Please contact us for the driver before use it,
Please use it outside if it can not get the satellites

Specification:
Supported operating systems: Windows 10/8/7/Vista/XP/CE
Support Google Earth
C / A code, 1.023MHz stream
Receive Band: L1 [1575.42MHz] Tracking Channels: 56
Support DGPS [WAAS, EGNOS and MSAS]
Positioning performance: 2D plane: 5m [average]
2D plane: 3.5m [average], has DGPS auxiliary.
Drift: <0.02m>
Timing Accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18,000 m
Maximum speed: 500m / s
Acceleration: <4g electrical="">
Tracking sensitivity:-162dBm
Acquisition sensitivity:-160dBm
Cold Start Time: 29s [average]
Warm start time: 28s [average]
Hot start time: 1s [average]
Recapture Time: 0.1s [average]
Operating temperature: -30 to +80

Packing includes:
1* VK172 G-MOUSE USB GPS/GLONASS USB GPS Receiver

GARMIN 010-00321-31 GPS 18x USB. The GPS 18x is a GPS sensor targeted to OEM clients for use in automotive, fleet vehicle, and electronics applications where a small, highly accurate GPS receiver is needed. This 12 parallel channel, WAAS enabled GPS receiver is available in either CMOS level serial or USB 2. 0 full speed versions, and comes with an integrated magnetic base. The puck like receiver is 2. 4 inches in diameter and weighs just ounces, making it an ideal solution in applications where space is at a premium. The GPS 18x is offered in three different cable configurations: A style USB, DB 9 pin serial with 12 volt cigarette lighter adapter /PC, or bare wire /LVC. The PC and LVC versions both default to output data in the industry standard NMEA 0183 data format, but may also be user programmed to output data in the GARMIN proprietary format. The USB version produces data only in the GARMIN proprietary format. All three versions of the GPS 18 come complete with non volatile memory for storage of configuration information, a real time clock, and raw measurement output data for sophisticated customer applications. The LVC version additionally provides a pulse per second logic level output whose rising edge is aligned to the UTC second within 1 microsecond. The USB 2. 0 full speed version of the GPS18 is also compatible with USB 1. 1 full speed hosts.

Features: Dimension: 56mm*56mm*18mm Weight: 70g Connector: USB 2.0 Male interface Specification Chipset: M8030-KT Receiving Format: GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. Frequency: GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1 Channels: 72 Searching Channel Sensitivity Tracking: -167dBm Reacquisition: -160dBm Cold start: -148dBm Hot start: -156dBm Accuracy Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity: 0.1m/sec 95% (SA off) Timing: 1us synchronized to GPS time Acquisition Time Cold Start: 26s Warm start: 25s Hot start: 1s Data output Support Rate: 4800bps to 921600bps, Auto-adapted baud rate Data Level: Default USB level Data Protocol: NMEA-0183 or UBX, Default NMEA-0183 NMEA Message: RMC, VTG, GGA, GSA, GSV, GLL \ Update Rate: 1Hz-10Hz, Default 1Hz FLASH: 4M FLASH, Store the configuration permanently Mechanical Specifications Cable Length: 2.0m Fixed: Magnetic bottom Operational Limits Altitude: 50,000m Max Velocity: 515m/s Max Acceleration: Less than 4g Power consumption VCC: DC Voltage 3.6V-5.5V,Typical: 5.0V Current: Capture 70mA/5.0V Environment Operating temp: -40 °C ~ +85°C Storage Temp: -40°C ~ +105°C Pin Description: 1: PIN VCC: DC 3.6V-5.5V supply input, Typical: 5.0V 2: PIN D-: USB D- 3: PIN D+: USB D+ 4: PIN GND: Ground Packaging List 1Piece BN-80U USB GPS Receiver

Model: VK-162
C/A code, 1.023MHz code stream
Receiving band: L1 [1575.42MHz]
Tracking channel: 50
Support DGPS [WAAS, EGNOS and MSAS]
Positioning performance
2D plane: 5m [average]
2D plane: 3.5m [average], with DGPS assistance.
Drift: <0.02m>
Timing accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18,000 meters
Maximum speed: 500m/s
Acceleration: <>

Electrical properties:
Tracking sensitivity: -160dBm
Capture sensitivity: -146dBm
Cold start time: 32s [average]
Warm start time: 32s [average]
Hot start time: 1s [average]
Recapture time: 0.1s [average]
Operating temperature: -30°C to +80°C
Line length 2m

Package Included:

ND-105C features high GPS sensitivity, Micro USB interface, low power consumption and ultra small form factor. This product is powered by MTK GPS solution; it can provide you with superior sensitivity and performance even in urban canyon and dense foliage environment. ND-105C supports up to 210 PRN channels. With 66 search channels and 22 simultaneous tracking channels, ND-105C acquires and tracks satellites in the shortest time even at indoor signal levels. Through ND-105C’s excellent low-power consumption characteristic, while using power sensitive devices, especially portable applications.

ND-105C PCBA with a simple ID design is suitable for the following device accessory:

● Smartphone (Android)
● Tablet (Android, Windows)
● Laptop (Windows, Mac OSX, Linux)
● Requires Android device to have “USB Host” support & “PL2303 GPSInfo” app on Android to function.

Product Features

● MediaTek high performance GPS Chipset
● Very high sensitivity (Chip Tracking Sensitivity: -165 dBm)
● Extremely fast TTFF (Time To First Fix) at low signal level
● Micro USB interface (includes Micro USB to USB Adapter cable)
● Built-in LNA
● Built-in GPS Antenna
● Built-in GPS status LED(Red)
● Built-in Back up Battery.
● Compact size (30.4 mm x 15.4 mm x 4.5 mm) suitable for portable application
● Very low power consumption
● Support NMEA0183 V4.0(GGA,GSA,GSV,RMC)
● Support SBAS (WASS, EGNOS, MSAS, GAGAN), QZSS
● Micro USB Supports Android, Linux, Windows (including 8.1 & 10) & Mac OSX operating systems       

● Includes a Micro USB to USB adapter cable for use with Windows & Mac OSX Laptops.

For Android Setup instructions, please visit the USGlobalSat Forum here: http://usglobalsat.com/forum/index.php?topic=4790 or visit the ND-105C Support Page: http://usglobalsat.com/s-200-nd-105c-support.aspx

Unfortunately, the ND-105C is not compatible with Windows RT, Windows 8.1 RT or iOS Devices like iPad, iPhone or iPod Touch.